L. J. F. C. Vera and M. -F. Hsieh, "Investigating the Impact of Characteristic Current on IPMSM Efficiency Area in Flux-Weakening Region," in IEEE Transactions on Magnetics, vol. 60, no. 9, pp. 1-6, Sept. 2024, Art no. 8204006, doi: 10.1109/TMAG.2024.3429178. keywords: {Motors;Inductance;Couplings;Magnetic flux;Torque;Electric motors;Genetic algorithms;Characteristic current;constant power speed range (CPSR);electric vehicle;flux weakening;interior permanent magnet synchronous motor (IPMSM)},

Le, T.-L., Hsieh, M.-F.: A sliding mode-based single-loop control strategy for permanent magnet synchronous motor drives. IET Power Electron. 17, 78–91 (2024). https://doi.org/10.1049/pel2.12616 

T.-L. Le and M.-F. Hsieh, An enhanced direct torque control strategy with composite controller for permanent magnet synchronous motor, Asian J. Control (2024), 1–20, DOI 10.1002/asjc.3306. 

D. -C. Hsiao and M. -F. Hsieh, "Integrated Design and Power Loss Minimization of Reaction Wheel Motor for Satellite Attitude Control," in IEEE Transactions on Industry Applications, vol. 59, no. 3, pp. 3291-3299, May-June 2023, doi: 10.1109/TIA.2023.3249149.

A. Mohammad-Alikhani, B. Nahid-Mobarakeh and M. -F. Hsieh, "One-Dimensional LSTM-Regulated Deep Residual Network for Data-Driven Fault Detection in Electric Machines," in IEEE Transactions on Industrial Electronics, vol. 71, no. 3, pp. 3083-3092, March 2024, doi: 10.1109/TIE.2023.3265054.

T. -A. Huynh, Y. -T. Nguyen Le, Z. Lee, M. -C. Tsai, P. -W. Huang and M. -F. Hsieh, "Influence of Flux Barriers and Permanent Magnet Arrangements on Performance of High-Speed Flux-Intensifying IPM Motor," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-6, Nov. 2023, Art no. 8203606, doi: 10.1109/TMAG.2023.3290538.

D. -C. Hsiao and M. -F. Hsieh, "Design and Implementation of Novel Homopolar Magnetic Bearings Incorporated in Reaction Wheel for Satellite Attitude Control," in IEEE Access, vol. 11, pp. 66374-66381, 2023, doi: 10.1109/ACCESS.2023.3290308.

Hsu H-Y, Lo T-Y, Hsieh M-F. A simple signal extraction-based online real-time diagnosis approach for interturn short-circuit fault of permanent magnet motor. Int J Circ Theor Appl. 2023; 51(7): 3246-3262. doi:10.1002/cta.3589 

M. -F. Hsieh, C. -Y. Chang, T. -A. Huynh and D. G. Dorrell, "Design and Analysis of Consequent-Pole Permanent Magnet Vernier Motor With Cancellation of Even-Order Harmonics," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-6, Nov. 2023, Art no. 8204406, doi: 10.1109/TMAG.2023.3293268.

H. -Y. Hsu and M. -F. Hsieh, "A Simple Search Coil Based on Motor Winding Strands for Rotor Position Estimation," in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-10, 2023, Art no. 7505210, doi: 10.1109/TIM.2023.3302369.

M. -F. Hsieh, L. -H. Lin, T. -A. Huynh and D. Dorrell, "Development of Machine Learning-Based Design Platform for Permanent Magnet Synchronous Motor Toward Simulation Free," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-5, Nov. 2023, Art no. 8205705, doi: 10.1109/TMAG.2023.3309151.

T. -A. Huynh, V. -H. Che and M. -F. Hsieh, "Maximization of High-Efficiency Operating Range of Spoke-Type PM E-Bike Motor by Optimization Through New Motor Constant," in IEEE Transactions on Industry Applications, vol. 59, no. 2, pp. 1328-1339, March-April 2023, doi: 10.1109/TIA.2022.3205571.

T. D. Ton, M. F. Hsieh, and P. H. Chen, “A novel robust sensorless technique for field-oriented control drive of permanent magnet synchronous motor,” IEEE Access, vol. 9, 2021, doi: 10.1109/ACCESS.2021.3097120.

F. S. Pai, Y. Z. Huang, P. H. Chen, and M. F. Hsieh, “Operating efficiency enhancement of hybrid energy storage system for IPMSM drives,” International Journal of Electronics, 2021, doi: 10.1080/00207217.2020.1870734.

T. A. Huynh, J. X. Peng, M. F. Hsieh, and P. W. Huang, “Anti-Demagnetization Analysis of Fractional Slot Concentrated Windings Interior Permanent Magnet Motor Considering Effect of Rotor Design Parameters,” IEEE Transactions on Magnetics, 2021, doi: 10.1109/TMAG.2021.3090319.

M. F. Hsieh, P. H. Chen, F. S. Pai, and R. Y. Weng, “Development of supercapacitor-aided hybrid energy storage system to enhance battery life cycle of electric vehicles,” Sustainability (Switzerland), vol. 13, no. 14, 2021, doi: 10.3390/su13147682.

T. A. Huynh and M. F. Hsieh, “Improvement of Traction Motor Performance for Electric Vehicles Using Conductors with Insulation of High Thermal Conductivity Considering Cooling Methods,” IEEE Transactions on Magnetics, vol. 57, no. 2, 2021, doi: 10.1109/TMAG.2020.3021127.

D. K. Ngo, M. F. Hsieh, and T. Dung Le, “Analysis on Field Weakening of Flux Intensifying Synchronous Motor Considering PM Dimension and Armature Current,” IEEE Transactions on Magnetics, vol. 57, no. 2, 2021, doi: 10.1109/TMAG.2020.3023176.

T. D. Ton, N. C. Chen, and M. F. Hsieh, “Analysis of switching frequency on performance of motor drive based on silicon carbide mosfet,” International Journal of Electrical Engineering, vol. 27, no. 6, 2020, doi: 10.6329/CIEE.202012_27(6).0003.

S. W. Chang, M. F. Hsieh, W. L. Cai, and H. D. Shen, “Detailed heat transfer measurements of impinging swirling and non-swirling jet arrays emitted from grooved orifice plate,” Chemical Engineering and Processing - Process Intensification, vol. 149, 2020, doi: 10.1016/j.cep.2020.107820.

M. F. Hsieh and Y. C. Weng, “A low torque ripple direct torque control method for interior permanent magnet motor,” Applied Sciences (Switzerland), vol. 10, no. 5, 2020, doi: 10.3390/app10051723.

Torque Enhancement for a Novel Flux Intensifying PMa-SynRM Using Surface-Inset Permanent Magnet.於: IEEE Transactions on Industry Applications. 2019

Irreversible Demagnetization Analysis for Multilayer Magnets of Permanent Magnet-Assisted Synchronous Reluctance Machines Considering Current Phase Angle.於: IEEE Transactions on Industry Applications. 2019

An Investigation Into the Effect of PM Arrangements on PMa-SynRM Performance.於: IEEE Transactions on Industry Applications. 2018

Huynh, Anh ; Hsieh, Min Fu ; Shih, Kai Jung ; Kuo, Hsiu Fu. / An Investigation into the Effect of PM Arrangements on PMa-SynRM Performance. 於: IEEE Transactions on Industry Applications. 2018

Wang, Ming Shyan ; Hsieh, Min Fu ; Kung, Ying Shieh ; Lin, Guan Ting. / Maximum torque per ampere control of IPMSM drive by fuzzy logic. 於: Microsystem Technologies. 2018

Huynh, Thanh Anh ; Hsieh, Min Fu. / Performance analysis of permanent magnet motors for electric vehicles (EV) traction considering driving cycles. 於: Energies. 2018

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh (2017, Nov). Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI).

T. A. Huynh and M.-F. Hsieh* (2017, Nov). Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor. IEEJ Journal of Industry Applications, vol. 11. (EI). MOST 105-2622-8-006-001. 本人為通訊作者.

T.A. Huynh and M.-F. Hsieh* (2017, Nov). Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI). MOST 105-2622-8-006-001. 本人為通訊作者.

1.          F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang (2017, Oct). Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer. International Journal of Circuit Theory and Applications, vol. 45, no. 10, pp. 1439–1446. (SCI). 本人為通訊作者.

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh (2017, Nov). Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI).

T. A. Huynh and M.-F. Hsieh* (2017, Nov). Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor. IEEJ Journal of Industry Applications, vol. 11. (EI). MOST 105-2622-8-006-001. 本人為通訊作者.

T.A. Huynh and M.-F. Hsieh* (2017, Nov). Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI). MOST 105-2622-8-006-001. 本人為通訊作者.

F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang (2017, Oct). Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer. International Journal of Circuit Theory and Applications, vol. 45, no. 10, pp. 1439–1446. (SCI). 本人為通訊作者.

C.-H. Hsu, Y.-M. Huang, M.-F. Hsieh, C.-M. Fu, S. Adireddy and D.B. Chrisey (2017, Jul). Transformer Sound Level Cause from Core Magnetostriction and Winding Stress Displacement Variation. AIP Advances, 7, 056681. (SCI, 82/145, Applied Physics).

M.-S. Wang, M.-F. Hsieh, I.N. Syamsiana and W.-C. Fang (2017, Apr). Fuzzy Maximum Torque per Ampere and Maximum Torque per Voltage Control of Interior Permanent Magnet Synchronous Motor Drive. Sensors and Materials, vol. 29, no. 4, pp. 461-472. (SCI).

T.A. Huynh and M.-F. Hsieh*, “Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications,” IEEE Transactions on Magnetics (accepted), vol. 53, no. 11, 2017. (SCI) (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh, “Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine,” IEEE Transactions on Magnetics (accepted), vol. 53, no. 11, 2017 (SCI)

T. A. Huynh and M.-F. Hsieh*, "Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor," IEEJ Journal Industry Applications (accepted), vol. 11, 2017. (EI) (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang, “Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer,” International Journal of Circuit Theory and Applications, published online in Mar, 2017. (DOI: 10.1002/cta.2341) (SCI) (105-2623-E-024-001-ET)

C.-H. Hsu, Y.-M. Huang, M.-F. Hsieh, C.-M. Fu, S. Adireddy and D.B. Chrisey, “Transformer Sound Level Cause from Core Magnetostriction and Winding Stress Displacement Variation,” AIP Advances 7, 056681, 2017. (SCI).

M.-S. Wang, M.-F. Hsieh, Y.-S. Kung and G.-T. Lin, “Maximum Torque per Ampere Control of IPMSM Drive by Fuzzy Logic,” Microsystem Technologies, published online in Sep 2016. (DOI: 10.1007/s00542-016-3119-5) (SCI) (MOST 104-2221-E-218-025)

M.-S. Wang, M.-F. Hsieh, I.N. Syamsiana and W.-C. Fang, “Fuzzy Maximum Torque per Ampere and Maximum Torque per Voltage Control of Interior Permanent Magnet Synchronous Motor Drive,” Sensors and Materials, vol. 29, no. 4, pp. 461-472, 2017. (SCI) (MOST 104-2221-E-218-025)

M.-F. Hsieh*, Y.-H. Chang and D.G. Dorrell, “Design and Analysis of Brushless Doubly Fed Reluctance Machine for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 52, no. 7, 7422795, 2016. (SCI) (MOST 101-2628-E-006-016-MY3)

S. Wang, D.G. Dorrell, Y. Guo and M.-F. Hsieh, “Inductive Charging Coupler with Assistive Coils. IEEE Transactions on Magnetics,” vol. 52, no. 7, 7428937, 2016. (SCI).

D.G. Dorrell, J.K.H. Shek and M.-F. Hsieh, “The Development of an Indexing Method for the Comparison of Unbalanced Magnetic Pull in Electrical Machines,” IEEE Transactions on Industry Applications, vol. 52, no. 1, pp. 145-153, 2016. (SCI) (MOST 101-2923-M-007-003)

I.-H. Lin, M.-F. Hsieh*, H.-F. Kuo and M.-C. Tsai, “Improved Accuracy for Performance Evaluation of Synchronous Reluctance Motor,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113404, 2015. (SCI) (MOST 103-2622-E-006-037)

C.-C. Chiang, M.-F. Hsieh*, Y.-H. Li and M.-C. Tsai, “Impact of Electrical Steel Punching Process on the Performance of Switched Reluctance Motors,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113304, 2015. (SCI) (MOST 103-2622-E-006-037)

C.-H. Hsu, M.-F. Hsieh, C.-M. Fu and Y.-M. Huang, “Effects of Multicore Structure on Magnetic Losses and Magnetomechanical Vibration at High Frequencies,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8402704, 2015. (SCI)

C.-H. Hsu, S.-L. Lee, C.-C. Lin, C.-S. Liu, S.-Y. Chang, M.-F. Hsieh*, Y.-M. Huang and C.-M Fu. “Reduction of Vibration and Sound-Level for a Single-Phase Power Transformer With Large Capacity,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403204, 2015. (SCI)

M.-F. Hsieh, C.-H. Hsu, C.-M. Fu and Y.-M. Huang, “Design of Transformer With High-Permeability Ferromagnetic Core and Strengthened Windings for Short-Circuit Condition,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403304, 2015. (SCI)

M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “Online Detection of Induction Motor's Stator Winding Short-Circuit Faults,” IEEE Systems Journal, vol. 8, no. 4, 1272-1282, 2014. (SCI)

C.-C. Chiang, A.M. Knight, M.-F. Hsieh, M.-G. Tsai, B. H. Liu, I.-G. Chen, Z.-L. Gaing and M.-C. Tsai, “Effects of Annealing on Magnetic Properties of Electrical Steel and Performances of SRM After Punching,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8203904, 2014. (SCI) (MOST 102-2622-E-006-032)

M.-F. Hsieh*, I.-H. Lin and D.G. Dorrell, “An Analytical Method Combining Equivalent Circuit and Magnetic Circuit for BDFRG,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8206605, 2014. (SCI) (MOST 101-2628-E-006-016-MY3)

Z.-L. Gaing, Y.-Y. Hsiah, M.-C. Tsai, M.-F. Hsieh and M.-H. Tsai, “Rigorous Design of a Switched Reluctance Motor Using a Hybrid Design Model,” Journal of International Conference on Electrical Machines and Systems, vol. 3, no. 3, 256-263, 2014. (EI) (MOST 101-2221-E-244-011)

M.-F. Hsieh*, D.G. Dorrell, C.-K. Lin, P.-T. Chen and P.Y.P. Wung, “Modeling and Effects of In Situ Magnetization of Isotropic Ferrite Magnet Motors,” IEEE Transactions on Industry Applications, vol. 50, no. 1, 364-374, 2014. (SCI).

Z.-L. Gaing, C.-H. Lin, M.-H. Tsai, M.-F. Hsieh and M.-C. Tsai, “Rigorous Design and Optimization of Brushless PM Motor Using Response Surface Methodology with Quantum-Behaved PSO Operator,” IEEE Transactions on Magnetics, vol. 50, no. 1, 4002704, 2014. (SCI) (MOEA 100-EC-17-A-05-S1-192)

M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “A Novel Indicator of Stator Winding Inter-turn Fault in Induction Motor Using Infrared Thermal Imaging,” Infrared Physics & Technology, vol. 61, pp. 330-336, 2013. (SCI).

D. G. Dorrell, J. K. H. Shek, M. A. Mueller and M.-F. Hsieh, “Damper Windings in Induction Machines for Reduction of Unbalanced Magnetic Pull and Bearing Wear,” IEEE Transactions on Industry Applications, vol. 49, no. 5, pp. 2206-2216, 2013. (SCI).

M.-F. Hsieh*, Y.-C. Hsu, D. G. Dorrell and P.-T. Chen, “Evaluation of Permanent Magnet Generator Manufactured Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 7, pp. 4084-4087, 2013. (SCI) (NSC 101-3113-E-006-003)

M.-F. Hsieh* and Y.-H. Yeh, “Rotor Eccentricity Effect on Cogging Torque of PM Generators for Small Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1897-1990, 2013. (SCI) (MOST 101-3113-E-006-003)

M.-F. Hsieh*, C.-K. Lin and I.-H. Lin, “Design and Analysis of High Temperature Superconducting Generator for Offshore Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1881-1884, 2013. (SCI).

M.-F. Hsieh*, I.-H. Lin and D. G. Dorrell, “Magnetic Circuit Modeling of Brushless Doubly-Fed Machines with Induction and Reluctance Rotors,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2359-2362, 2013. (SCI) (MOST 101-2628-E-006-016-MY3)

M.-F. Hsieh*, Y.-C. Hsu and P.-T. Chen, “Analysis and Experimental Study of Permanent Magnet Machines with In-situ Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2351-2354, 2013. (SCI) (MOST 101-3113-E-006-003)

M.-F. Hsieh* and W.-C. Chang, “Combining Full and Semi Closed Loop Synchronous Control for Dual Mechanically Coupled Ball Screw System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 139-147, 2012. (EI) (MOST 98-2815-C-006-045-E)

M.-F. Hsieh* and Y.-H. Yeh, “The Integrated Design of a Permanent-magnet Generator for Small Wind Energy Conversion System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 98-105, 2012. (EI) (MOST 98-3114-E-006-011)

M.-F Hsieh*, I.-H. Lin, Y.-C. Hsu and R.A. McMahon, “Design of Brushless Doubly-Fed Machines Based on Magnetic Circuit Modeling,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 3017–3020, 2012. (SCI) (MOST 100-2918-I-006-019)

M.-F. Hsieh*, F.-S. Hsu, and D.G. Dorrell, “Winding Changeover Permanent-Magnet Generators for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 4168-4171, 2012. (SCI) (MOST 98-2623-E-006-001-ET)

M.-F. Hsieh*, W.-S. Yao and C.-H. Hsu, “Modeling and Control of a Feed Drive with Multiple Mechanically Coupled Ball Screws,” Asian Journal of Control, vol. 14, no. 5, pp. 1227-1238, 2012. (SCI).

M.-F. Hsieh*, I.-H. Lin, D.G. Dorrell, M.-J. Hsieh and C.-C. Lin, “Development of a Wave Energy Converter Using a Two Chamber Oscillating Water Column,” IEEE Transactions on Sustainable Energy, vol. 3, no. 3, pp. 482–497, 2012. (SCI) (NSC100-2221-E-006-015, NSC 99-ET-E-006-007-ET)

Y.-H. Yeh, M.-F. Hsieh* and D.G. Dorrell, “Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors,” IEEE Transactions on Industry Applications, vol. 48, no. 2, pp. 612-622, 2012. (SCI)

D.G. Dorrell, M.-F. Hsieh and A.M. Knight, “Alternative Rotor Designs for High Performance Brushless Permanent Magnet Machines for Hybrid Electric Vehicles,” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 835-838, 2012. (SCI)

M.-F. Hsieh* and Y.-C. Hsu, “A Generalized Magnetic Circuit Modeling Approach for Design of Surface Permanent-Magnet Machines,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 779-792, 2012. (SCI)

M.-F. Hsieh*, Y.-M. Lien and D.G. Dorrell, “Post-Assembly Magnetization of Rare-Earth Fractional-Slot Surface Permanent-Magnet Machines Using a Two-Shot Method,” IEEE Transactions on Industry Applications, vol. 47, no. 6, pp. 2478-2486, 2011. (SCI)

D.G. Dorrell, J. Shek, M.-F. Hsieh* and M.A. Mueller, “Unbalanced Magnetic Pull in Cage Induction Machines for Fixed-Speed Renewable Energy Generators,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4096-4099, 2011. (SCI)

Y.-S. Hsu, M.-C. Tsai and M.-F. Hsieh, “Sub-assembly Magnetization Strategies for a Transverse Flux Motor Equipped with Multiple NdFeB Magnet,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 3681-3684, 2011. (SCI) (MOEA 99-EC-17-A-05-S1-103)

D. G. Dorrell, M.-F. Hsieh, M. Popescu, L. Evans, D. A. Staton and V. Grout, “A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent Magnet Motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 3741-3757, 2011. (SCI).

D. G. Dorrell, M. F. Hsieh and C. C. Lin, “A Multichamber Oscillating Water Column using Cascaded Savonius Turbines,” IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 2372-2380, 2010. (SCI)

Min-Fu Hsieh*, Hung-Ju Liao, “A Wide Speed Range Sensorless Control Technique of Brushless DC Motors for Electric Propulsors,” Journal of Marine Science and Technology, vol. 18, no 5, pp. 735-745, 2010. (SCI) (NSC 95-2221-E-006-471)

Min-Fu Hsieh*, You-Chiuan Hsu, David G. Dorrell, “Design of Large Power Surface-Mounted Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Industrial Electronics, vol. 57, no. 10, pp. 3376-3384, 2010. (SCI)

David G. Dorrell, Min-Fu Hsieh and Chi-Chien Lin, “A Small Segmented Oscillating Water Column using a Savonius Rotor Turbine,” IEEE Transactions on Industry Applications, vol. 46, no. 5, pp. 2080-2088, 2010. (SCI)

D.G. Dorrell and M.-F. Hsieh, “Calculation of Radial Forces in Cage Induction Motors at Start - the Effect of Rotor Differential,” IEEE Transactions on Magnetics, vol. 46, no. 8, pp. 3029-3032, 2010. (SCI)

David G. Dorrell, Min-Fu Hsieh, Youguang Guo, “Unbalanced Magnet Pull in Large Brushless Rare-Earth Permanent Magnet Motors With Rotor Eccentricity,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4586-4589, 2009. (SCI)

M.F. Hsieh* and K.H. Hu, "Analysis of a Tubular Linear Motor with Soft Magnetic Composites for Reciprocating Compressors," Journal of Applied Physics, vol. 103, 07F 112, 2008. (SCI)

Y.S. Hsu, M.C. Tsai and M.F. Hsieh, "Novel Stator Design of Fan Motors Using Soft Magnetic Composites," Journal of Applied Physics, vol. 103, 07F 109, 2008. (SCI)

M.F. Hsieh*, C.J. Tung, W.S. Yao, M.C. Wu and Y.S. Liao, “Servo Design of a Vertical Axis Drive Using Dual Linear Motors for High Speed Electric Discharge Machining,” International Journal of Machine Tools and Manufacture, vol. 47, no. 3-4, pp. 546-554, 2007. (SCI) (NSC92-2213-E-006-095)

M.F. Hsieh* and Y.C. Hsu, “Characteristics Regulation for Manufacture of Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2510-2512, 2007. (SCI) (NSC 95-2221-E-006-471)

M.F. Hsieh*, Y.C. Hsu, D.G. Dorrell and K.H. Hu, “Investigation on End Winding Inductance in Motor Stator Windings,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2513-2515, 2007. (SCI) (NSC 95-ET-7-006-008-ET)

D.G. Dorrell, M.F. Hsieh and Y.C. Hsu, “Post Assembly Magnetization Patterns in Rare Earth Permanent Magnet Motors,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2489-2491, 2007. (SCI)

M.F. Hsieh*, W.S. Yao and C.R. Chiang, “Modeling and Synchronous Control of a Single-Axis Stage Driven by Dual Mechanically-Coupled Parallel Ball Screws,” The International Journal of Advanced Manufacturing Technology, vol. 34, no.9-10, pp. 933-943, 2007. (SCI)

M.F. Hsieh*, Y.C. Lai, A. Horng and M.C. Tsai, “An Efficient Approach for Cogging Torque Analysis of Motors with Three-Dimensional Flux Distribution,” IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3464-3466, 2006. (SCI)

M.F. Hsieh* and Y.S. Hsu, “An Investigation on Influence of Magnet Arc Shaping upon Back Electromotive Force Waveforms for Design of Permanent-Magnet Brushless Motors,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3949–3951, 2005. (SCI) (NSC 93-2611-E-006-020)

M.C. Tsai, M.H. Weng and M.F. Hsieh, “Computer-Aided Design and Analysis of a Novel Fan Motor,” IEEE Transactions on Magnetics, vol. 38, no. 5, pp. 3467-3474, 2002. (SCI)

M.F. Hsieh, D.N. Moreton, J. Mistry and D.G. Moffat, “Limit Loads for Knuckle-encroaching Nozzles in Torispherical Heads: Experimental Verification of FE Predictions,” Journal of Strain Analysis, vol. 37, no. 4, pp. 313-326, 2002. (SCI)

D.G. Moffat, M.F. Hsieh and M. Lynch, “An Assessment of ASME III and CEN TC54 Methods of Determining Plastic and Limit Loads for Pressure System Components,” Journal of Strain Analysis, vol. 36, no. 3, 2001. (SCI)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Limit Load Interaction under Combined Pressure and Piping Loads,” International Journal of Pressure Vessels and piping, vol. 77, pp. 807-815, 2001. (SCI)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Stress Levels and Load Interaction Effects,” Journal of Process Mechanical Engineering (Proceedings of the Institution of Mechanical Engineers Part E), vol. 214, pp. 31-41, 2000. (SCI)

M.-C. Tsai, C.-C. Chou and M.-F. Hsieh, "Development of a real-time servo control test bench," IEEE Transactions on Education, vol. 40, no. 4, pp. 242-252, 1997. (SCI)

金書安、謝旻甫*（2016年05月）。磁鐵輔助之同步磁阻馬達效率與轉矩提升 效益分析。機械月刊，05月，頁56-68。。本人為通訊作者。

翁佑甯、蔡逸文、謝旻甫*（2014年08月）。同步磁阻電機之特性分析。電機月 刊，頁98-113，2014年8月號。本人為通訊作者。

江瑞利、帥俊銘、謝旻甫、蔡名曉、王品娟（2014年04月）。55kW級高功率車 用磁阻動力馬達之設計與優化。機械月刊，2014年04月號。

江瑞利、胡家勝、郭冠毅、謝旻甫、蔡名曉（2013年08月）。高轉速磁阻馬達設 計與最佳化--使用軟磁複合材料。電機月刊，頁86-98，2013年8月。

余守龍、謝旻甫*（2013年07月）。應用於無人飛行載具之整合式起動馬達- 發電機研發。機械工業雜誌，頁83-96，2013年7月號。本人為通訊作者。

江瑞利、謝曜陽、謝旻甫、蔡名曉（2013年07月）。運用混合設計策略進行切 換式磁阻馬達之優化設計。機械工業雜誌，頁42 -54，2013年7月號。

許裕昇、金書安、謝旻甫（2013年04月）。非稀土聚磁型永磁同步馬達磁路設 計。機械月刊。本人為通訊作者。

白富升、謝旻甫、李威廷、張偉隆（2013年01月）。使用於一體式起動馬達發 電機之雙向電能轉換電路設計。電機月刊。

謝銘峻、謝旻甫（2010年05月）。Darrieus 風機葉片數與扭轉角度對風機性 能的影響。風電月刊(WindPower)，pp.16-27。本人為通訊作者。

謝旻甫、余守龍（2009年05月）。高效率永磁無刷馬達之設計與分析。電機月 刊，No.221，P.140。本人為第一作者、通訊作者。

蔡明祺，蕭仕偉，謝旻甫，顛覆傳統的馬達--超音波馬達，科學發展月刊367期，2003年7月。

姚武松，蔡明祺，李榮顯，謝旻甫，多軸線性馬達驅動伺服系統設計，機械月刊第332期，2003年3月。(NSC 90-2212-E-006-100)