Huynh, Anh ; Hsieh, Min Fu ; Shih, Kai Jung ; Kuo, Hsiu Fu. / An Investigation into the Effect of PM Arrangements on PMa-SynRM Performance. 於: IEEE Transactions on Industry Applications. 2018

Wang, Ming Shyan ; Hsieh, Min Fu ; Kung, Ying Shieh ; Lin, Guan Ting. / Maximum torque per ampere control of IPMSM drive by fuzzy logic. 於: Microsystem Technologies. 2018

Huynh, Thanh Anh ; Hsieh, Min Fu. / Performance analysis of permanent magnet motors for electric vehicles (EV) traction considering driving cycles. 於: Energies. 2018

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh (2017, Nov). Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI).

T. A. Huynh and M.-F. Hsieh* (2017, Nov). Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor. IEEJ Journal of Industry Applications, vol. 11. (EI). MOST 105-2622-8-006-001. 本人為通訊作者.

T.A. Huynh and M.-F. Hsieh* (2017, Nov). Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI). MOST 105-2622-8-006-001. 本人為通訊作者.

1.          F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang (2017, Oct). Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer. International Journal of Circuit Theory and Applications, vol. 45, no. 10, pp. 1439–1446. (SCI). 本人為通訊作者.

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh (2017, Nov). Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI).

T. A. Huynh and M.-F. Hsieh* (2017, Nov). Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor. IEEJ Journal of Industry Applications, vol. 11. (EI). MOST 105-2622-8-006-001. 本人為通訊作者.

T.A. Huynh and M.-F. Hsieh* (2017, Nov). Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications. IEEE Transactions on Magnetics, vol. 53, no. 11. (SCI). MOST 105-2622-8-006-001. 本人為通訊作者.

F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang (2017, Oct). Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer. International Journal of Circuit Theory and Applications, vol. 45, no. 10, pp. 1439–1446. (SCI). 本人為通訊作者.

C.-H. Hsu, Y.-M. Huang, M.-F. Hsieh, C.-M. Fu, S. Adireddy and D.B. Chrisey (2017, Jul). Transformer Sound Level Cause from Core Magnetostriction and Winding Stress Displacement Variation. AIP Advances, 7, 056681. (SCI, 82/145, Applied Physics).

M.-S. Wang, M.-F. Hsieh, I.N. Syamsiana and W.-C. Fang (2017, Apr). Fuzzy Maximum Torque per Ampere and Maximum Torque per Voltage Control of Interior Permanent Magnet Synchronous Motor Drive. Sensors and Materials, vol. 29, no. 4, pp. 461-472. (SCI).

T.A. Huynh and M.-F. Hsieh*, “Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications,” IEEE Transactions on Magnetics (accepted), vol. 53, no. 11, 2017. (SCI) (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

C. Ubadigha, M.-C. Tsai and M.-F. Hsieh, “Modulating ring structural configuration influence on the dual air-gap magnetic gear electric machine,” IEEE Transactions on Magnetics (accepted), vol. 53, no. 11, 2017 (SCI)

T. A. Huynh and M.-F. Hsieh*, "Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor," IEEJ Journal Industry Applications (accepted), vol. 11, 2017. (EI) (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

F.‐S. Pai, M.-F. Hsieh* and Y.‐P. Wang, “Cumulative current‐magnetizing method for a capacitor‐discharged impulse magnetizer,” International Journal of Circuit Theory and Applications, published online in Mar, 2017. (DOI: 10.1002/cta.2341) (SCI) (105-2623-E-024-001-ET)

C.-H. Hsu, Y.-M. Huang, M.-F. Hsieh, C.-M. Fu, S. Adireddy and D.B. Chrisey, “Transformer Sound Level Cause from Core Magnetostriction and Winding Stress Displacement Variation,” AIP Advances 7, 056681, 2017. (SCI).

M.-S. Wang, M.-F. Hsieh, Y.-S. Kung and G.-T. Lin, “Maximum Torque per Ampere Control of IPMSM Drive by Fuzzy Logic,” Microsystem Technologies, published online in Sep 2016. (DOI: 10.1007/s00542-016-3119-5) (SCI) (MOST 104-2221-E-218-025)

M.-S. Wang, M.-F. Hsieh, I.N. Syamsiana and W.-C. Fang, “Fuzzy Maximum Torque per Ampere and Maximum Torque per Voltage Control of Interior Permanent Magnet Synchronous Motor Drive,” Sensors and Materials, vol. 29, no. 4, pp. 461-472, 2017. (SCI) (MOST 104-2221-E-218-025)

M.-F. Hsieh*, Y.-H. Chang and D.G. Dorrell, “Design and Analysis of Brushless Doubly Fed Reluctance Machine for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 52, no. 7, 7422795, 2016. (SCI) (MOST 101-2628-E-006-016-MY3)

S. Wang, D.G. Dorrell, Y. Guo and M.-F. Hsieh, “Inductive Charging Coupler with Assistive Coils. IEEE Transactions on Magnetics,” vol. 52, no. 7, 7428937, 2016. (SCI).

D.G. Dorrell, J.K.H. Shek and M.-F. Hsieh, “The Development of an Indexing Method for the Comparison of Unbalanced Magnetic Pull in Electrical Machines,” IEEE Transactions on Industry Applications, vol. 52, no. 1, pp. 145-153, 2016. (SCI) (MOST 101-2923-M-007-003)

I.-H. Lin, M.-F. Hsieh*, H.-F. Kuo and M.-C. Tsai, “Improved Accuracy for Performance Evaluation of Synchronous Reluctance Motor,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113404, 2015. (SCI) (MOST 103-2622-E-006-037)

C.-C. Chiang, M.-F. Hsieh*, Y.-H. Li and M.-C. Tsai, “Impact of Electrical Steel Punching Process on the Performance of Switched Reluctance Motors,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113304, 2015. (SCI) (MOST 103-2622-E-006-037)

C.-H. Hsu, M.-F. Hsieh, C.-M. Fu and Y.-M. Huang, “Effects of Multicore Structure on Magnetic Losses and Magnetomechanical Vibration at High Frequencies,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8402704, 2015. (SCI)

C.-H. Hsu, S.-L. Lee, C.-C. Lin, C.-S. Liu, S.-Y. Chang, M.-F. Hsieh*, Y.-M. Huang and C.-M Fu. “Reduction of Vibration and Sound-Level for a Single-Phase Power Transformer With Large Capacity,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403204, 2015. (SCI)

M.-F. Hsieh, C.-H. Hsu, C.-M. Fu and Y.-M. Huang, “Design of Transformer With High-Permeability Ferromagnetic Core and Strengthened Windings for Short-Circuit Condition,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403304, 2015. (SCI)

M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “Online Detection of Induction Motor's Stator Winding Short-Circuit Faults,” IEEE Systems Journal, vol. 8, no. 4, 1272-1282, 2014. (SCI)

C.-C. Chiang, A.M. Knight, M.-F. Hsieh, M.-G. Tsai, B. H. Liu, I.-G. Chen, Z.-L. Gaing and M.-C. Tsai, “Effects of Annealing on Magnetic Properties of Electrical Steel and Performances of SRM After Punching,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8203904, 2014. (SCI) (MOST 102-2622-E-006-032)

M.-F. Hsieh*, I.-H. Lin and D.G. Dorrell, “An Analytical Method Combining Equivalent Circuit and Magnetic Circuit for BDFRG,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8206605, 2014. (SCI) (MOST 101-2628-E-006-016-MY3)

Z.-L. Gaing, Y.-Y. Hsiah, M.-C. Tsai, M.-F. Hsieh and M.-H. Tsai, “Rigorous Design of a Switched Reluctance Motor Using a Hybrid Design Model,” Journal of International Conference on Electrical Machines and Systems, vol. 3, no. 3, 256-263, 2014. (EI) (MOST 101-2221-E-244-011)

M.-F. Hsieh*, D.G. Dorrell, C.-K. Lin, P.-T. Chen and P.Y.P. Wung, “Modeling and Effects of In Situ Magnetization of Isotropic Ferrite Magnet Motors,” IEEE Transactions on Industry Applications, vol. 50, no. 1, 364-374, 2014. (SCI).

Z.-L. Gaing, C.-H. Lin, M.-H. Tsai, M.-F. Hsieh and M.-C. Tsai, “Rigorous Design and Optimization of Brushless PM Motor Using Response Surface Methodology with Quantum-Behaved PSO Operator,” IEEE Transactions on Magnetics, vol. 50, no. 1, 4002704, 2014. (SCI) (MOEA 100-EC-17-A-05-S1-192)

M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “A Novel Indicator of Stator Winding Inter-turn Fault in Induction Motor Using Infrared Thermal Imaging,” Infrared Physics & Technology, vol. 61, pp. 330-336, 2013. (SCI).

D. G. Dorrell, J. K. H. Shek, M. A. Mueller and M.-F. Hsieh, “Damper Windings in Induction Machines for Reduction of Unbalanced Magnetic Pull and Bearing Wear,” IEEE Transactions on Industry Applications, vol. 49, no. 5, pp. 2206-2216, 2013. (SCI).

M.-F. Hsieh*, Y.-C. Hsu, D. G. Dorrell and P.-T. Chen, “Evaluation of Permanent Magnet Generator Manufactured Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 7, pp. 4084-4087, 2013. (SCI) (NSC 101-3113-E-006-003)

M.-F. Hsieh* and Y.-H. Yeh, “Rotor Eccentricity Effect on Cogging Torque of PM Generators for Small Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1897-1990, 2013. (SCI) (MOST 101-3113-E-006-003)

M.-F. Hsieh*, C.-K. Lin and I.-H. Lin, “Design and Analysis of High Temperature Superconducting Generator for Offshore Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1881-1884, 2013. (SCI).

M.-F. Hsieh*, I.-H. Lin and D. G. Dorrell, “Magnetic Circuit Modeling of Brushless Doubly-Fed Machines with Induction and Reluctance Rotors,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2359-2362, 2013. (SCI) (MOST 101-2628-E-006-016-MY3)

M.-F. Hsieh*, Y.-C. Hsu and P.-T. Chen, “Analysis and Experimental Study of Permanent Magnet Machines with In-situ Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2351-2354, 2013. (SCI) (MOST 101-3113-E-006-003)

M.-F. Hsieh* and W.-C. Chang, “Combining Full and Semi Closed Loop Synchronous Control for Dual Mechanically Coupled Ball Screw System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 139-147, 2012. (EI) (MOST 98-2815-C-006-045-E)

M.-F. Hsieh* and Y.-H. Yeh, “The Integrated Design of a Permanent-magnet Generator for Small Wind Energy Conversion System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 98-105, 2012. (EI) (MOST 98-3114-E-006-011)

M.-F Hsieh*, I.-H. Lin, Y.-C. Hsu and R.A. McMahon, “Design of Brushless Doubly-Fed Machines Based on Magnetic Circuit Modeling,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 3017–3020, 2012. (SCI) (MOST 100-2918-I-006-019)

M.-F. Hsieh*, F.-S. Hsu, and D.G. Dorrell, “Winding Changeover Permanent-Magnet Generators for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 4168-4171, 2012. (SCI) (MOST 98-2623-E-006-001-ET)

M.-F. Hsieh*, W.-S. Yao and C.-H. Hsu, “Modeling and Control of a Feed Drive with Multiple Mechanically Coupled Ball Screws,” Asian Journal of Control, vol. 14, no. 5, pp. 1227-1238, 2012. (SCI).

M.-F. Hsieh*, I.-H. Lin, D.G. Dorrell, M.-J. Hsieh and C.-C. Lin, “Development of a Wave Energy Converter Using a Two Chamber Oscillating Water Column,” IEEE Transactions on Sustainable Energy, vol. 3, no. 3, pp. 482–497, 2012. (SCI) (NSC100-2221-E-006-015, NSC 99-ET-E-006-007-ET)

Y.-H. Yeh, M.-F. Hsieh* and D.G. Dorrell, “Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors,” IEEE Transactions on Industry Applications, vol. 48, no. 2, pp. 612-622, 2012. (SCI)

D.G. Dorrell, M.-F. Hsieh and A.M. Knight, “Alternative Rotor Designs for High Performance Brushless Permanent Magnet Machines for Hybrid Electric Vehicles,” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 835-838, 2012. (SCI)

M.-F. Hsieh* and Y.-C. Hsu, “A Generalized Magnetic Circuit Modeling Approach for Design of Surface Permanent-Magnet Machines,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 779-792, 2012. (SCI)

M.-F. Hsieh*, Y.-M. Lien and D.G. Dorrell, “Post-Assembly Magnetization of Rare-Earth Fractional-Slot Surface Permanent-Magnet Machines Using a Two-Shot Method,” IEEE Transactions on Industry Applications, vol. 47, no. 6, pp. 2478-2486, 2011. (SCI)

D.G. Dorrell, J. Shek, M.-F. Hsieh* and M.A. Mueller, “Unbalanced Magnetic Pull in Cage Induction Machines for Fixed-Speed Renewable Energy Generators,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4096-4099, 2011. (SCI)

Y.-S. Hsu, M.-C. Tsai and M.-F. Hsieh, “Sub-assembly Magnetization Strategies for a Transverse Flux Motor Equipped with Multiple NdFeB Magnet,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 3681-3684, 2011. (SCI) (MOEA 99-EC-17-A-05-S1-103)

D. G. Dorrell, M.-F. Hsieh, M. Popescu, L. Evans, D. A. Staton and V. Grout, “A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent Magnet Motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 3741-3757, 2011. (SCI).

D. G. Dorrell, M. F. Hsieh and C. C. Lin, “A Multichamber Oscillating Water Column using Cascaded Savonius Turbines,” IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 2372-2380, 2010. (SCI)

Min-Fu Hsieh*, Hung-Ju Liao, “A Wide Speed Range Sensorless Control Technique of Brushless DC Motors for Electric Propulsors,” Journal of Marine Science and Technology, vol. 18, no 5, pp. 735-745, 2010. (SCI) (NSC 95-2221-E-006-471)

Min-Fu Hsieh*, You-Chiuan Hsu, David G. Dorrell, “Design of Large Power Surface-Mounted Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Industrial Electronics, vol. 57, no. 10, pp. 3376-3384, 2010. (SCI)

David G. Dorrell, Min-Fu Hsieh and Chi-Chien Lin, “A Small Segmented Oscillating Water Column using a Savonius Rotor Turbine,” IEEE Transactions on Industry Applications, vol. 46, no. 5, pp. 2080-2088, 2010. (SCI)

D.G. Dorrell and M.-F. Hsieh, “Calculation of Radial Forces in Cage Induction Motors at Start - the Effect of Rotor Differential,” IEEE Transactions on Magnetics, vol. 46, no. 8, pp. 3029-3032, 2010. (SCI)

David G. Dorrell, Min-Fu Hsieh, Youguang Guo, “Unbalanced Magnet Pull in Large Brushless Rare-Earth Permanent Magnet Motors With Rotor Eccentricity,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4586-4589, 2009. (SCI)

M.F. Hsieh* and K.H. Hu, "Analysis of a Tubular Linear Motor with Soft Magnetic Composites for Reciprocating Compressors," Journal of Applied Physics, vol. 103, 07F 112, 2008. (SCI)

Y.S. Hsu, M.C. Tsai and M.F. Hsieh, "Novel Stator Design of Fan Motors Using Soft Magnetic Composites," Journal of Applied Physics, vol. 103, 07F 109, 2008. (SCI)

M.F. Hsieh*, C.J. Tung, W.S. Yao, M.C. Wu and Y.S. Liao, “Servo Design of a Vertical Axis Drive Using Dual Linear Motors for High Speed Electric Discharge Machining,” International Journal of Machine Tools and Manufacture, vol. 47, no. 3-4, pp. 546-554, 2007. (SCI) (NSC92-2213-E-006-095)

M.F. Hsieh* and Y.C. Hsu, “Characteristics Regulation for Manufacture of Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2510-2512, 2007. (SCI) (NSC 95-2221-E-006-471)

M.F. Hsieh*, Y.C. Hsu, D.G. Dorrell and K.H. Hu, “Investigation on End Winding Inductance in Motor Stator Windings,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2513-2515, 2007. (SCI) (NSC 95-ET-7-006-008-ET)

D.G. Dorrell, M.F. Hsieh and Y.C. Hsu, “Post Assembly Magnetization Patterns in Rare Earth Permanent Magnet Motors,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2489-2491, 2007. (SCI)

M.F. Hsieh*, W.S. Yao and C.R. Chiang, “Modeling and Synchronous Control of a Single-Axis Stage Driven by Dual Mechanically-Coupled Parallel Ball Screws,” The International Journal of Advanced Manufacturing Technology, vol. 34, no.9-10, pp. 933-943, 2007. (SCI)

M.F. Hsieh*, Y.C. Lai, A. Horng and M.C. Tsai, “An Efficient Approach for Cogging Torque Analysis of Motors with Three-Dimensional Flux Distribution,” IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3464-3466, 2006. (SCI)

M.F. Hsieh* and Y.S. Hsu, “An Investigation on Influence of Magnet Arc Shaping upon Back Electromotive Force Waveforms for Design of Permanent-Magnet Brushless Motors,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3949–3951, 2005. (SCI) (NSC 93-2611-E-006-020)

M.C. Tsai, M.H. Weng and M.F. Hsieh, “Computer-Aided Design and Analysis of a Novel Fan Motor,” IEEE Transactions on Magnetics, vol. 38, no. 5, pp. 3467-3474, 2002. (SCI)

M.F. Hsieh, D.N. Moreton, J. Mistry and D.G. Moffat, “Limit Loads for Knuckle-encroaching Nozzles in Torispherical Heads: Experimental Verification of FE Predictions,” Journal of Strain Analysis, vol. 37, no. 4, pp. 313-326, 2002. (SCI)

D.G. Moffat, M.F. Hsieh and M. Lynch, “An Assessment of ASME III and CEN TC54 Methods of Determining Plastic and Limit Loads for Pressure System Components,” Journal of Strain Analysis, vol. 36, no. 3, 2001. (SCI)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Limit Load Interaction under Combined Pressure and Piping Loads,” International Journal of Pressure Vessels and piping, vol. 77, pp. 807-815, 2001. (SCI)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Stress Levels and Load Interaction Effects,” Journal of Process Mechanical Engineering (Proceedings of the Institution of Mechanical Engineers Part E), vol. 214, pp. 31-41, 2000. (SCI)

M.-C. Tsai, C.-C. Chou and M.-F. Hsieh, "Development of a real-time servo control test bench," IEEE Transactions on Education, vol. 40, no. 4, pp. 242-252, 1997. (SCI)

金書安、謝旻甫*（2016年05月）。磁鐵輔助之同步磁阻馬達效率與轉矩提升 效益分析。機械月刊，05月，頁56-68。。本人為通訊作者。

翁佑甯、蔡逸文、謝旻甫*（2014年08月）。同步磁阻電機之特性分析。電機月 刊，頁98-113，2014年8月號。本人為通訊作者。

江瑞利、帥俊銘、謝旻甫、蔡名曉、王品娟（2014年04月）。55kW級高功率車 用磁阻動力馬達之設計與優化。機械月刊，2014年04月號。

江瑞利、胡家勝、郭冠毅、謝旻甫、蔡名曉（2013年08月）。高轉速磁阻馬達設 計與最佳化--使用軟磁複合材料。電機月刊，頁86-98，2013年8月。

余守龍、謝旻甫*（2013年07月）。應用於無人飛行載具之整合式起動馬達- 發電機研發。機械工業雜誌，頁83-96，2013年7月號。本人為通訊作者。

江瑞利、謝曜陽、謝旻甫、蔡名曉（2013年07月）。運用混合設計策略進行切 換式磁阻馬達之優化設計。機械工業雜誌，頁42 -54，2013年7月號。

許裕昇、金書安、謝旻甫（2013年04月）。非稀土聚磁型永磁同步馬達磁路設 計。機械月刊。本人為通訊作者。

白富升、謝旻甫、李威廷、張偉隆（2013年01月）。使用於一體式起動馬達發 電機之雙向電能轉換電路設計。電機月刊。

謝銘峻、謝旻甫（2010年05月）。Darrieus 風機葉片數與扭轉角度對風機性 能的影響。風電月刊(WindPower)，pp.16-27。本人為通訊作者。

謝旻甫、余守龍（2009年05月）。高效率永磁無刷馬達之設計與分析。電機月 刊，No.221，P.140。本人為第一作者、通訊作者。

蔡明祺，蕭仕偉，謝旻甫，顛覆傳統的馬達--超音波馬達，科學發展月刊367期，2003年7月。

姚武松，蔡明祺，李榮顯，謝旻甫，多軸線性馬達驅動伺服系統設計，機械月刊第332期，2003年3月。(NSC 90-2212-E-006-100)

ICEMS 2017

IFEEC 2017-ECCE Asi

Chang-Yi Cheng, Jia-Sheng Hu, Min-Fu Hsieh (2017, Nov). Energy Management System with Bi-directional Converter on Hybrid Sources Electric Scooters. 43th Annual Conference of the IEEE Industrial Electronics Society (IECON 2017), Beijing.

Thanh Anh Huynh, Min-Fu Hsieh, Kai-Jung Shih and Hsiu-Fu Kuo (2017, Aug). Design and Analysis of Permanent-Magnet Assisted Synchronous Reluctance Motor. 20th International Conference on Electrical Machines and Systems (ICEMS 2017), Sydney. (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

T.A. Huynh and M.-F. Hsieh* (2017, Apr). Comparative Study of PM-assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications. 2017 INTERMAG, Dublin. (MOST 105-2622-8-006-001, MOST105-2218-E-006-008)

Min-Fu Hsieh*, Po-Ying Li, Hao-Yu Ting, Chung-Chan Hsu, Chin-Yang Chang, Wei-Che Lin, and Le-Ren Chang-Chien (2016, Nov). A Regenerative Braking System for Switched Reluctance Machine Applied to Electric Vehicles. 19th International Conference on Electrical Machines and Systems, Chiba. MOST 104-2218-E-006-026.

Thanh Anh Huynh and Min-Fu Hsieh* (2016, Nov). Performance Evaluation of Thin Electrical Steels Applied to Interior Permanent Magnet Motor. 19th International Conference on Electrical Machines and Systems, Chiba. MOST 104-2622-8-006-001.

Chien-Hsing Li and Min-Fu Hsieh* (2016, Aug). Multiphysics Analysis for Traction Motors Considering Electromagnetics, Noise, Vibration and Harshness. 4th International Conference of the Asian Union of Magnetics Societies, Tainan.

Min-Fu Hsieh*, Chung Chan Hsu, Hao-Yu Ting, Po-Ying Li, Le-Ren Chang-Chien and Yu-Hsien Li (2016, Aug). Improved Non-Linear Torque Sharing Function Applied to Torque Ripple Reduction of Switched Reluctance Motor. 4th International Conference of the Asian Union of Magnetics Societies, Tainan.

Min-Fu Hsieh*, Yao-Hsin Chang and David G Dorrell (2016, Jan). Design and Analysis of Brushless Doubly-Fed Reluctance Generator for Renewable Energy Applications. Joint MMM/INTERMAG Conference, San Diego.

Fu-Sheng Pai, Yi-Ping Wang, Chia-Chin Chou, Min-Fu Hsieh (2015, Oct). Magnetizing approach for permanent magnets with resonant power conversion. 2015 IEEE International Telecommunications Energy Conference, Osaka. MOST 103-2221-E-024-004.

M.F. Hsieh and S.L. Yu (2015, May). In-Situ Magnetization of Permanent Magnet Machines Considering Magnetizer Capacity and Connection Types. IEEE International Magnetics Conference (INTERMAG) 2015.

M.F. Hsieh, C.C. Chiang and M.C. Tsai (2015, May). Impact of Electrical Steel Punching Process on Performance of Switched Reluctance Motors. IEEE International Magnetics Conference (INTERMAG) 2015.

M.F. Hsieh, I.H. Lin and M.C. Tsai (2015, May). Improved Accuracy for Performance Prediction of Synchronous Reluctance Motor by Incorporating End Turn Inductance in 2-D FEM. IEEE International Magnetics Conference (INTERMAG) 2015.

M.F. Hsieh, I.W. Tsai and Y.N. Weng (2015, May). Cost-effective Design for High Efficiency Synchronous Reluctance Motor. IEEE International Magnetics Conference (INTERMAG) 2015.

I-Hsien Lin, Min-Fu Hsieh*, David G. Dorrell and Mi-Ching Tsai (2014, Oct). Dimension Effect on a Grid-connected Brushless Doubly-fed Reluctance Generator. The 17th International Conference on Electrical Machines and Systems (ICEMS2014, Hangzhou, China. MOST 101-2628-E-006-016-MY3.

Yao-Hsin Chang, Yi-Ting Li, I-Hsien Lin, Min-Fu Hsieh* (2014, Oct). A Design Approach Integrating the Magnetic Circuit and Electric Circuit Models for BDFIM. The 17th International Conference on Electrical Machines and Systems (ICEMS2014), Hangzhou, China. MOST 101-2628-E-006-016-MY3.

David G. Dorrell, Jonathan K.H. Shek, Min-Fu Hsieh (2014, Sep). The Development of an Indexing Method for the Comparison of Unbalanced Magnetic Pull in Electrical Machines. Energy Conversion Congress and Exhibition (ECCE), Pittsburgh.

Chao-Chien Chiang, Mu-Gong Tsai, Bernard Haochih Liu, In-Gann Chen, Andrew M. Knight, Mi-Ching Tsai, Zwe-Lee Gaing and Min-Fu Hsieh (2014, May). Effects of Annealing on Magnetic Properties of Electrical Steel and Performances of SRM After Punching. International Magnetics Conference (Intermag 2014), Dresden, Germany.

M.F. Hsieh, I.H. Lin and D.G. Dorrell (2014, May). An Analytical Method Combining Equivalent Circuit and Magnetic Circuit for a Brushless Doubly-Fed Reluctance Generators. Intermag, Dresden, Germany.

M.F. Hsieh, S.A. Chin, C.H. Lee, and M.C. Tsai (2014, May). Design of a High Torque Density Ferrite IPM Motor for Electric Vehicles with Coupled Electromagnetics and Stress Analysis. Intermag, Dresden, Germany.

Zwe-Lee Gaing, Jian-Yu Zhu, Min-Fu Hsieh, Mi-Ching Tsai and Ming-Hsiao Tsai (2014, May). Multi-Objective Optimization for a Permanent-Magnet- Assisted Synchronous Reluctance Motor Using Response Surface Method with SFLA Operator. International Magnetics Conference (Intermag 2014), Dresden, Germany.

M.-F. Hsieh and I.H. Lin (2013, May). Comparison of Brushless Induction and Reluctance Doubly-Fed Machines. 22nd IEEE International Symposium on Industrial Electronics, Taipei, Taiwan.

M.-F. Hsieh, I.H. Lin and D. G. Dorrell (2013, Jan). Comparison of Brushless Doubly-Fed Machines with Various Rotor Types. the 12th Joint MMM/Intermag Conference, Chicago.

M.-F. Hsieh, Y.C. Hsu and P.T. Chen (2013, Jan). Evaluation of Permanent Magnet Machines Manufactured Using Post-Assembly Magnetization. the 12th Joint MMM/Intermag Conference, Chicago.

M.-F. Hsieh, and C.-K. Lin (2013, Jan). Optimum Design of High Temperature Superconducting Generator for Offshore Wind Turbines. the 12th Joint MMM/Intermag Conference, Chicago.

M.-F. Hsieh and Y.H. Yeh (2012, Nov). Rotor Eccentricity Effect on Cogging Torque of PM Generators for Small Wind Turbines. the Fifteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC2012), Oita.

M.-F. Hsieh, I.-H. Lin and D. G. Dorrell (2012, Nov). Design of Brushless Doubly-Fed Machine with Induction Rotor and Reluctance Rotor based on Magnetic Circuit Modeling. the Fifteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC2012), Oita.

M.-F. Hsieh, Y.C. Hsu and P.T. Chen (2012, Nov). Analysis and Experimental Study of Permanent Magnet Machines with In-situ Magnetization. the Fifteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC2012), Oita.

M.-F. Hsieh, and C.K. Lin (2012, Nov). Design and Analysis of High Temperature Superconducting Generator for Offshore Wind Turbines. the Fifteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC2012), Oita.

M.-F. Hsieh, F.S. Hsu, and D.G. Dorrell (2012, May). Winding Changeover Permanent-Magnet Generators for Renewable Energy Applications. IEEE International Magnetics Conference, Vancouver.

M.-F. Hsieh, I.H. Lin, Y.C. Hsu and R.A. McMahon (2012, May). Design of Brushless Doubly-Fed Machines Based on Magnetic Circuit Modeling. IEEE International Magnetics Conference, Vancouver.

M.-F. Hsieh, I.H. Lin and W.Y. Chen (2011, Dec). Comparative Study on Performance of Savonius and Darrieus Turbines for a Wave Energy Converter using Oscillating Water Column. the 11th International Conference on Fluid Control (FLUCOME 2011), Keelung, Taiwan.

D. G. Dorrell, J. K. H. Shek, M. A. Mueller, M.-F. Hsieh (2011, Sep). Damper Windings in Induction Machines for Reduction of Unbalanced Magnetic Pull and Bearing Wear. IEEE Energy Conversion Congress and Exposition (ECCE).

J.K.H. Shek, D.G. Dorrell, M.-F. Hsieh, D.E. Macpherson, and M.A. Mueller (2011, Sep). Reducing Bearing Wear in Induction Generators for Wave and Tidal Current Energy Devices. IET Renewable Power Generation Conference.

M.-F. Hsieh, C.C. Lin and H.Y. Li (2011, Sep). Development of a Simulator for Control Design of a Wave Maker. The Society of Instrument and Control Engineers, Tokyo.

M.-F. Hsieh, C.K. Lin, D.G. Dorrell and P. Wung (2011, Sep). Modeling and Effects of In-Situ Magnetization of Isotropic Ferrite Magnet Motors. Energy Conversion Congress and Exhibition (ECCE 2011).

M.-F. Hsieh, H.Y. Li and K.Y. Lai (2011, Sep). Synchronous Control of a Network-Based Triple Mechanically-Coupled Ball Screws System. The Society of Instrument and Control Engineers, Tokyo.

D. G. Dorrell and M.-F. Hsieh (2011, Jul). Alternative Rotor Designs for High Performance Brushless Permanent Magnet Machines for Hybrid Electric Vehicles. Compumag 2011.

D. G. Dorrell, J. Shek, M. F Hsieh and M. A. Mueller (2011, Apr). Unbalanced Magnetic Pull in Cage Induction Machines for Fixed-Speed Renewable Generators. Intermag 2011, Taipei, Taiwan.

M.-F. Hsieh, Yao-Min Lien and David Dorrell (2010, Sep). Post-Assembly Magnetization of Rare-Earth Fractional-Slot Permanent-Magnet Machines using a Two-Shot Method. IEEE ECCE 2010, Atlanta.

M.-F. Hsieh, and I.H. Lin (2010, Sep). Application of a Marine Dynamic Positioning System Using CAN. the International Forum on Systems and Mechatronics (IFSM 2010), Singapore.

M.-F. Hsieh, and K.Y. Lai (2010, Sep). A Network-Based Real-Time Control System for Mechanically-Coupled Multi-Axis Servomechanism. the International Forum on Systems and Mechatronics (IFSM 2010), Singapore.

M.-F. Hsieh, and W.C. Chang (2010, Sep). Combining Full and Semi Closed Loop Synchronous Control for Dual Mechanically Coupled Ball Screw System. the International Forum on Systems and Mechatronics(IFSM 2010), Singapore.

M.-F. Hsieh, and Y.H. Yeh (2010, Sep). The Integrated Design of a Permanent- Magnet Generator for Small Wind Energy Conversion System. the International Forum on Systems and Mechatronics (IFSM 2010), Singapore.

Yu-Han Yeh, M.-F. Hsieh and David Dorrell (2010, Sep). Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors. IEEE ECCE 2010, Atlanta.

D. G. Dorrell and M.-F. Hsieh (2010). Issues with Low Speed Direct-Drive Permanent-Magnet Generator Design – Comparison of Radial-Flux Slotted and Torus Machines. IECON 2010.

M.-F. Hsieh, D.G. Dorrell, Y.H. Yeh, and S. Ekram (2009, Nov). Cogging Torque Reduction in Axial Flux Machines for Small Wind Turbines. the 35rd Annual Conference of the IEEE Industrial Electronics Society (IECON’09), Porto.

M.-F. Hsieh, W.S. Yao and C.H. Hsu (2009, Nov). Modeling and Control of a Feed Drive with Multiple Mechanically Coupled Ball Screws. 2009 CACS International Automatic Control Conference, Taipei, Taiwan.

M.-F. Hsieh, Y.H. Yeh, D.G. Dorrell, and S. Ekram (2009, Nov). Reduction of Cogging Torque for Axial Flux Generator Applied to Small Wind Turbine. International Conference on Computation of Electromagnetic Field (Compumag 2009), Florianopolis.

M.-F. Hsieh, Y.H. Yeh, D.G. Dorrell, and Samsul Ekram (2009, Nov). Design of a Dual-Rotor Dual-Output Radial-Flux Motor for Variable Speed Air Conditioners. International Conference on Computation of Electromagnetic Field (Compumag 2009), Florianopolis.

Y.C. Hsu, M.-F. Hsieh, and R.A. McMahon (2009, Nov). A General Design Method for Electric Machines Using Magnetic Circuit Model Considering the Flux Saturation Problem. International Conference on Power Electronics and Drive Systems (PEDS 2009), Taipei, Taiwan.

D.G. Dorrell, C.C. Lin and M.-F. Hsieh (2009, Sep). A Multi-Chamber Oscillating Water Column using Cascaded Savonius Turbines. the IEEE ECCE Conference, San Jose.

M.-F. Hsieh, W.S. Yao and C.H. Hsu (2009, Jun). System Identification of a Feed Drive Composed of Multiple Mechanically-Coupled Ball Screws. the 10th International Conference on Automation Technology, Tainan, Taiwan.

M.-F. Hsieh, D.G. Dorrell, and Samsul Ekram (2009, May). Cogging Torque Reduction in Axial Flux Machines for Small Wind Turbines. the International Intermag Conference, Sacramento.

M.-F. Hsieh, Y.H. Yeh, D.G. Dorrell, and Samsul Ekram (2009, May). A Radial Flux Machine with Dual Rotors Dual Output Shafts for Variable Speed Air Conditioners. the International Intermag Conference, Sacramento.

M.F. Hsieh, W.S. Yao and C.H. Hsu, "System Identification of a Feed Drive Composed of Multiple Mechanically-Coupled Ball Screws," in Proceedings of Automation 2009, the 10th International Conference on Automation Technology, Tainan, Jun. 27-29, 2009.

M.F. Hsieh, D.G. Dorrell, and Samsul Ekram, "Cogging Torque Reduction in Axial Flux Machines for Small Wind Turbines," in Proceedings of the International Intermag Conference, Sacramento, May, 2009.

M.F. Hsieh, Y.H. Yeh, D.G. Dorrell, and Samsul Ekram, "A Radial Flux Machine with Dual Rotors Dual Output Shafts for Variable Speed Air Conditioners," in Proceedings of the International Intermag Conference, Sacramento, May, 2009.

C.C. Lin, D.G. Dorrell and M.F. Hsieh, "A Small Segmented Oscillating Water Column using a Savonius Rotor Turbine," in Proceedings of the 2008 IEEE International Conference on Sustainable Energy Technologies, Singapore, Nov. 24-27, 2008.

F.S. Pai, S.J. Huang, M.F. Hsieh and C.M. Lin, "Design of Modular Inverter for Distributed Power Generation," in Proceedings of the 2008 IEEE International Conference on Sustainable Energy Technologies, Singapore, Nov. 24-27, 2008.

D.G. Dorrell and M.F. Hsieh, " Performance of Wells Turbines for use in Small-Scale Oscillating Water Columns," in Proceedings of the Eighteenth International Offshore and Polar Engineering Conference (ISOPE), Vancouver, Canada, July 6 - 11, 2008.

M.F. Hsieh, Y.C. Hsu, and K.H. Hu, “Investigation on End Winding Inductance in Stators of Permanent-Magnet Motors,” Proceedings of the 10th MMM/Intermag Joint Conference, Jan. 2007. (NSC 95-ET-7-006-008-ET)

M.F. Hsieh and Y.C. Hsu, “Characteristics Regulation for Manufacture of Permanent-Magnet Motors Using Post-Assembly Magnetization,” Proceedings of the 10th MMM/Intermag Joint Conference, Baltimore, Jan. 7-11, 2007. (NSC 95-2221-E-006-471)

M.F. Hsieh, S.H. Wang and W.S. Yao, "Development of an Anti-Rolling Control System Using Linear Motors," in Proceedings of the 2nd International Forum on Systems and Mechatronics (IFSM 2007), December 3-6, Tainan, Taiwan.

M.F. Hsieh and I.J. Lin, "A CAN Bus-based Control System for Automatic Ship Positioning," in Proceedings of the 2nd International Forum on Systems and Mechatronics (IFSM 2007), December 3-6, Tainan, Taiwan.

M.F. Hsieh, T.L. Fu, and Y.C. Hsu, “Development of a Magnetic Driven Polishing System,” the 2nd International Forum on Systems and Mechatronics (IFSM 2007), December 3-6, Tainan, Taiwan. (NSC95-2815-C-006 -062 -E)

M.F. Hsieh, H.J. Liao and P.J. Wu, "A Sensorless Driving Technique for Propulsion of Small Electric Ships," in Proceedings of the 2nd International Forum on Systems and Mechatronics (IFSM 2007), December 3-6, Tainan, Taiwan.

M.F. Hsieh and K.H Hu, "Analysis of a Tubular Linear Motor with Soft Magnetic Composites for Reciprocating Compressors," in Proceedings of the 52nd Magnetism and Magnetic Materials Conference (MMM2007), November 5-9, 2007, Florida, USA.

Y.S. Hsu, M.C. Tsai and M.F. Hsieh, "Novel Stator Design of Fan Motors Using Soft Magnetic Composites," in Proceedings of the 52nd Magnetism and Magnetic Materials Conference (MMM2007), November 5-9, 2007, Florida, USA.

M.F. Hsieh, Y.C. Hsu and D.G. Dorrell, "Design of Large Power Surface-mounted Permanent-magnet Motors Using Post-assembly Magnetization Process," in Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON'07), Taipei, Taiwan, Nov. 5-8, 2007.

M.F. Hsieh, J.H. Chen, Y.H. Yeh, C.L. Lee, P.H. Chen, Y.C. Hsu, and Y.H. Chen, "Integrated Design and Realization of a Hubless Rim-driven Thruster," in Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON'07), Taipei, Taiwan, Nov. 5-8, 2007.

D.G. Dorrell, M.F. Hsieh and W. Fillet, “Segmented Small Oscillating Water Columns Using In-Line Savonius Rotors,” in Proceedings of the International Offshore and Polar Engineering Conference (ISOPE), Lisbon, July 1–6, 2007.

M.F. Hsieh, Y.C. Hsu and D.G. Dorrell, “Design of Large Power Surface-mounted Permanent-magnet Motors Using Post-assembly Magnetization Process,” the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON’07), Taipei, Taiwan, Nov. 5-8, 2007. (NSC 95-ET-7-006-008-ET)

M.F. Hsieh, J.H. Chen, Y.H. Yeh, C.L. Lee, P.H. Chen, Y.C. Hsu, and Y.H. Chen, “Integrated Design and Realization of a Hubless Rim-driven Thruster,” the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON’07), Taipei, Taiwan, Nov. 5-8, 2007. (NSC 95-2221-E-006-471)

D.G. Dorrell and M.F. Hsieh, “Post Assembly Magnetization Patterns in Rare Earth Permanent Magnet Motors,” Proceedings of the 10th MMM/Intermag Joint Conference, Jan. 2007.

M.F. Hsieh, M.C. Tsai, A. Horng and Y.C. Lai, “An Efficient Approach for Cogging Torque Analysis of Motors with Three-Dimensional Flux Distribution,” Proceedings of the International Magnetics Conference, San Diego, May, 2006.

M.F. Hsieh and Y.S. Hsu, “An Investigation on Influence of Magnet Arc Shaping upon Back Electromotive Force Waveforms for Design of Permanent-Magnet Brushless Motors,” Proceedings of the International Magnetics Conference (INTERMAG 2005), Japan, April 4-8, 2005. (NSC 93-2611-E-006-020)

B. H Shen, M.F. Hsieh, M. C. Wu, G. L. Hsu, C. R. Chiang and M. C. Tsai, “Synchronous Control of a Parallel Dual Inverted Pendulum System Driven by Linear Servomotors”, Proceedings of the IEEE International Conference on Hands-on Intelligent Mechatronics and Automation (HIMA 2005), Taipei, Taiwan, July, 2005.

M.F. Hsieh, W.S. Yao, and M.C. Wu, “Design of a Linear Servo System for the Vertical Axis of High Speed Electric Discharge Machining,” Proceedings of the International Symposium on Linear Drives for Industrial Applications (LDIA 2005), Japan, 2005. (NSC92-2213-E-006-095)

M.F. Hsieh and Y.C. Hsiu, “Characteristic Analysis for IPM Motors with Post-Assembly Magnetization,” Proceedings of the the Eighth International Conference on Electric Machines and Systems (ICEMS 2005), Nanjing, China, September, 2005. (NSC 94-2623-7-006-009-ET)

T.C. Chen, R.D. Lin, M. C. Tsai, M.F. Hsieh, Z.Q. Zhu, P.G. Stewart and D. Howe, “Fuzzy Control for Torque Ripple Reduction of a Switched Reluctance Motor with External Rotor,” Proceedings of the International Conference on Electrical Machines and Systems, Jeju, Korea, November, 2004. (NSC 92-2911-I-006-029)

S.W. Hsiao, M.C. Tsai, M.S. Tsai and M.F. Hsieh, “Stator Modeling of a Traveling Wave-type Ultrasonic Linear Motor,” Proceedings of the International Conference on Electrical Machines and Systems, Jeju, Korea, November, 2004.

M.F. Hsieh, K.Y. Lo, C.Y. Sun and M.C. Tsai, “Development of Automated Alignment Techniques for Coupling of Fiber Optic Components,” ASME Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, Manchester, UK, 2004.

M.C. Tsai, M.F Hsieh and W.S. Yao, “Synchronous Control of Linear Servo Systems for CNC Machine Tools,” Proceedings of the European Control Conference (ECC2003), Cambridge UK, September 2003. (NSC 90-2212-E-006-100)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in Klöpperböden Head: The influence of a nozzle size on stress levels and limit loads”, Proceedings of the 10th International Conference on Pressure Vessel Technology, Vienna, Austria, July 7-10, 2003.

J.X. Yang, M.C. Tsai and M.F Hsieh, “Identification and Control of a Linear Servo System,” Proceedings of the International Symposium on Linear Drives for Industry Applications (LDIA 2003), Birmingham UK, September 8-10, 2003. (NSC 90-2212-E-006-100)

Z.Q. Zhu, S. Long, D. Howe, M. C. Tsai, M. F. Hsieh and T. C. Chen, “Significance of Vibration Modes in Noise and Vibration Generation of Switched Reluctance Motors,” Proceedings of the International Conference on Electrical Machines and Systems, Beijing (ICEMS), November 8-11, 2003. (NSC 91-2911-I-006-013)

M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Limit Load Interaction under Combined Pressure and Piping Loads,” Proceedings of the 9th International Conference on Pressure Vessel Technology, pp. 79-90, Sydney, 2000.

葉雨涵、謝旻甫（2012年12月）。400W風力發電機之動態偏心對頓轉轉矩影 響之分析。第七屆風能學術研討會，新竹。本人為通訊作者。

葉雨涵、黃鈺婷、謝旻甫（2012年12月）。徑向磁通發電機於風力發電之設計 應用。第七屆風能學術研討會，新竹。本人為通訊作者。

謝旻甫、陳引幹、張家銘、桂人傑、林清國（2012年12月）。高溫超導發電機之 最佳化設計。第七屆風能學術研討會，新竹。本人為第一作者、通訊作者。

謝旻甫、陳引幹、張家銘、黃鈺婷、林清國（2012年12月）。電磁力對10kW高 溫超導發電機的定子結構應力分析。第七屆風能學術研討會，新竹。本人為 第一作者、通訊作者。

林清國、謝旻甫、陳引幹、張家銘、桂人傑（2011年12月）。高溫超導發電機設 計及分析探討。第六屆風能學術研討會，台南。本人為通訊作者。

林清國、陳珮錡、謝旻甫、王上瑜、楊佳明、陳引幹、桂人傑、張家銘（2010年12月）。高溫超導發電機於離岸型風機之應用發展分析。第五屆風能學術研討 會，澎湖。本人為通訊作者。

謝旻甫、林易賢、林繼謙（2010年11月）。使用多隔間之岸基震盪水柱式波浪 發電系統之研製。第32 屆海洋工程研討會。本人為第一作者、通訊作者。

謝旻甫（2010年06月）。後充磁技術應用於表面型大型永磁電機之設計。第 二十二屆磁學與磁性技術研討會(受邀演講)，台中。本人為第一作者、通訊作者。

謝旻甫、許豐聖（2009年12月）。永磁式可變繞組風力發電機。第四屆風能學 術研討會，台北。本人為第一作者、通訊作者。

謝旻甫、石孟田（2009年12月）。軸向磁通變結構發電機之設計及其在風能 轉換系統之應用。第四屆風能學術研討會，台北。本人為第一作者、通訊作者。

M. F Hsieh, W. S. Yao and S. H. Wang, "A Dual Linear Motor Servo System for Injection Molding," 2008 第六屆全國精密製造研討會，台南，2008.

I-Hsien Lin, Ray-Lee Lin and Min-Fu Hsieh, "Voltage-loop Compensator Design for the CCM Current-mode Buck+Boost Converter with High Step-down Ratio," in Proceedings of the 7th Taiwan Power Electronics Conference & Exhibition, Tainan, 2008.

吳佩蓉、林瑞禮、謝旻甫，"具前級L-C濾波器之連續電流模式昇壓型電能轉換器的小訊號模型分析"，第七屆台灣電力電子研討會論文集，2008年9月5日。

徐佑銓、林瑞禮、謝旻甫，含直流匯流排電壓補償之單極式交/直流轉換器之補償器設計，第六屆台灣電力電子研討會論文集，2007年9月7日， 193~195頁。

顏宏諭、林瑞禮、謝旻甫，多相式同步切換的降壓轉換器之補償器設計，第六屆台灣電力電子研討會論文集，2007年9月7日， 862~865頁。

江嘉榮、姚武松、謝旻甫，造波機之全閉迴路伺服系統設計，自動控制研討會，南台科技大學，台南，2005年11月。

王盛篁、姚武松、謝旻甫，DSP-based 小型船舶減搖控制系統設計，自動控制研討會，南台科技大學，台南，2005年11月。(NSC93-2815-C-006 -063–E)